PIE 334PLUS-L-VIP

Do More with the PIECAL 334Plus! Calibrate Milliamp Instruments Source and Read 0.000 to 24.000 mA & -25.0 to 125.0% of 4-20 mA Read -99.99 to 99.99 V Read Loop currents up to 52.000 mA Simulate 2-Wire Transmitter, Power & Read Transmitters Menu Selectable 250 Ohm resistor for HART compatibility Calibrate with Accuracy Source mode accurate to .025% of Span at 4&20 mA Easy-to-Read Backlit Display Locate Loop Current Leakages Current Leak Detection > Automatic indication of Loop Current and Leakage Current. Measure ground current leakage from faulty wiring, flooded conduit and corrosion bridges. Leakage typically appears as a Zero Shift and helps you decide if the transmitter needs calibration or if there is a problem in the loop wiring. Faster Calibrations Three output EZ-CHECK switch 2 speed EZ-DIAL Stepping & Ramping Includes Rubber Boot & Test Leads